ENGLISH | 中文 | NEDERLANDS | U.K.

Entryvue catalog download, click here

Entryvue



Add the Entryvue power supplies with battery backup features so that your system stays on during power failures.

 

Entryvue® PS-20

  • Input:  100-240VAC -   50-60 Hz.
  • Output:  18VDC  -   1.0 Amp.

Entryvue® PS-50

  • Input: 100-240VAC
  • Output: 24VDC, 3.0 amp.

The PS-50 can only be used for the VD-900 and the RK  intercom systems. One power supply can power up to 16 monitors for the VD-900 system and up to 32 monitors for the RK system.

Entryvue® PS-60

  • Input: 100-240VAC
  • Output: 18VDC, 3.5Amp.

Power supply to hard wire  the wire for all intercom systems.   
This is enough to power 6 monitors in a single family system and up to 12 monitors in an apartment system.  The use of this power supply is recommended if you have multiple monitors in the house and this power supply comes standard with the DK and HK apartment systems.

Entryvue® PS-80

Output 18VDC

Power a complete system of up to 10 monitors. Allows you to hardwire the system, avoiding separate power supplies additions with every monitor and door station.

Entryvue® Baluns BU-200 (T and R)

When your door station or camera is more than 800’
(250 meters) away from the monitor, you can still transfer
your video signal ver CAT5E but we recommend to use
BU-200 active baluns. 

With the BU-200  you can transfer video and audio signals up to 3000’ (1000 meters)  without a significant loss in quality.   The BU-200  needs to be powered with 12VDC.  This means that there needs to be a power source near the camera.
ENTRYVUE © 2012.
Entryvue is a registered trademark.
HOME | ABOUT US | PRODUCTS | SPECIFICATIONS | MANUALS & WIRING | BUY NOW | FAQ | TRACKING | CONTACT US